The Pinch feature lets you remove small features (such as short edges and narrow regions) at the mesh level in order to generate better quality elements around those features. The Pinch feature provides an alternative to Virtual Topology,
The Connect feature can be used after the Share Topology feature to selectively share faces between two bodies of a multibody part. You will need to specify a tolerance and ANSYS DesignModeler will connect two faces into one face if the faces lie within the specified tolerance.
When you export from the Meshing application to ANSYS ICEM CFD format, an ANSYS ICEM CFD project file with the extension .prj, along with a geometry file (*.tin) and/or mesh file (*.uns) are written.
The Extrude Mesh option allows you to create elements of one type from selected elements of a lower dimension along a defined direction. This option is generally used to create a volume mesh of non-varying cross-section from a 2D mesh profile.
Source: SpaceClaim Use the Project tool to create edges on a solid’s face by extending the edges of another solid, surface, sketch, or note text. When you project onto a face, the tool…