Select Page
Ansys Fluent | Heat Transfer between plates

#### Bookstore

Source: brighthubengineering

Heat transfer is the process of transfer of heat from high temperature reservoir to low temperature reservoir. In terms of the thermodynamic system, heat transfer is the movement of heat across the boundary of the system due to temperature difference between the system and the surroundings. The heat transfer can also take place within the system due to temperature difference at various points inside the system. The difference in temperature is considered to be ‘potential’ that causes the flow of heat and the heat itself is called as flux.

## Modes of Heat Transfer

There are three modes of heat transfer between the two bodies: conduction, convection and radiation. These have been described below:

Conduction: The transfer of heat between two solid bodies is called as conduction. It depends on the difference in temperature of the hot and cold body. Example of conduction heat transfer is two bodies at different temperature kept in contact with each other. Another example is heating one end of the metal like copper; due to conduction heat transfer the other end of the metal also gets heated.

Convection: The transfer of heat between the solid surface and the liquid is called as convection heat transfer. Let us considering a vessel of water being heated, in this case heating of water due to transfer of heat from the vessel is convection heat transfer.

Radiation: When two bodies are at different temperatures and separated by distance, the heat transfer between them is called as radiation heat transfer. In case of the conduction and convection heat transfer there is a media to transfer the heat, but in case of the radiation heat transfer there is no media. The radiation heat transfer occurs due to the electromagnetic waves that exist in the atmosphere. One of the most important examples of radiation heat transfer is the heat of the sun coming on the earth.

In this tutorial, you will learn how simulate heat transfer between plates with different solid materials. In addition to this, you will learn how to create an interface using Ansys Fluent.

## Ansys CFX – NACA 4412 (Structured Mesh)

The NACA four-digit wing sections define the profile by:
First digit describing maximum camber as percentage of the chord.
Second digit describing the distance of maximum camber from the airfoil leading edge in tenths of the chord.

## OpenFOAM vs ANSYS CFX

OpenFOAM is the free, open source CFD software developed primarily by OpenCFD Ltd since 2004. It has a large user base across most areas of engineering and science, from both commercial and academic organisations.

## Ansys Fluent | Convection Heat transfer & Convergence Criteria

In this tutorial, you will learn how to configure your simulation with the Convection and analyze the convergence criteria to obtain accurate results

In this tutorial, you will learn how to simulate an Elbow 3d using Ansys Fluent, This is a basic tutorial and you can use Ansys Student version.

## Ansys Fluent | How to Plot Graph? | XY Plot

In this tutorial, you will learn how to generate an XY Plot and save its picture (Post-Processing) using Ansys Fluent.

## Ansys Fluent | How to calculate the values of the results of a simulation?

In this video, you will learn how to calculate the values of pressure, speed, temperature, and mass flow of a simulation.

## Ansys Meshing | Inflation

You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.

## Ansys Fluent | Y-Shaped Pipe Simulation

Pipe wyes are used to to allow one pipe to join another pipe at some degree or angle. As the name suggests, the pipe wyes are Y-shaped pipe fitting devices.

## Stay Up to Date With The Latest News & Updates

### Help us keep growing

CFD.NINJA is financed with its own resources, if you want to support us we will be grateful.

Subscribe to receive emails with detailed information related to the CFD.