Ansys Meshing – Body of Influence

Written by cfd.ninja

April 15, 2020

Bookstore

Source: Ansys

The Body of Influence option is available in the Type field if you selected a body and Use Adaptive Sizing is set to No. Using this option, you can set one body as a source of another body (that is, a Body of Influence). The Body of Influence will influence the mesh density of the body that it is scoped to, but it will not be a part of the model geometry nor will it be meshed. Body of Influence bodies are noted in the Details View of each prototype.

Although the Behavior option is not available for Body of InfluenceBody of Influence behaves as a Soft setting. That is, in the vicinity of a Body of Influence, the specified Body of Influence sizing must be larger than the smallest Curvature Min Size/Proximity Min Size and smaller than the global Max Size to have an effect on the mesh size distribution. The specified Body of Influence sizing imposes a local maximum size on all elements that are inside the boundary of the body. This is in contrast to the Sphere of Influence option, which behaves as a Hard setting.

Remember the following notes when using Body of Influence:

  • If your source body is a sphere, it is best for you to use the Sphere of Influence option instead of Body of InfluenceBody of Influence is intended for non-spherical bodies.

  • In general, users are discouraged from defining a Body of Influence and a Sphere of Influence such that the regions of influence overlap. In cases where elements fall within overlapping bodies/spheres of influence, elements will be created using the Sphere of Influence sizing that appears lowest in the Tree.

  • You cannot apply loads, mesh controls, etc. on bodies of influence. Bodies of influence are used only to influence the sizing controls and therefore only sizing attributes can be applied to them.

  • You can suppress and unsuppress bodies of influence.

  • If you are using Body of Influence with Match Control, be aware that the body of influence will not be copied from one matched entity to the other. As a workaround, you can copy the body in the DesignModeler application and use both bodies as your source.

  • When using Assembly Meshing, the body of influence cannot be scoped to a line body. If you want to use a body of influence with a virtual body, you can scope the body of influence to any body in the geometry. The body of influence does not have to be inside or even in contact with the scoped body. Although Contact Sizing is supported for assembly meshing algorithms, if it is applied to entities on a body that is scoped to a body of influence, the contact sizing is ignored.

 

In this tutorial, you will learn to use the Body of Influence tool using Ansys Meshing. With this tool you can generate localized mesh.

 

Do you want to learn Ansys ICEM CFD?

Related Articles

Ansys Meshing | Inflation

Ansys Meshing | Inflation

You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.

Ansys Meshing – Match Control

Ansys Meshing – Match Control

In this tutorial, you will learn how to use the Match Control tool in Ansys Meshing. Match Control allows duplicating the mesh in a body. We have two option Match Control Cyclic and Arbitrary.

Ansys Meshing – Sizing

Ansys Meshing – Sizing

By default, Use Adaptive Sizing is set to Yes, unless Physics Preference is set to CFD or Nonlinear Mechanical (in which case the default is Capture Curvature set to Yes),

Stay Up to Date With The Latest News & Updates

Help us keep growing

CFD.NINJA is financed with its own resources, if you want to support us we will be grateful.

Join Our Newsletter

Subscribe to receive emails with detailed information related to the CFD.

Follow Us

Subscribe to our social networks to receive notifications about our new tutorials

Pin It on Pinterest

Shares

Share This

Share this post with your friends!