Ansys Meshing – Fine Mesh

Written by

April 6, 2020


Source: Ansys

Available when Use Adaptive Sizing is set to Yes, the Resolution option controls the mesh distribution. The default setting is Program Controlled. The range of values that can be set is 0 to 7, with the mesh resolution changing from coarse (0) to fine (7).

A value of -1 will set the Resolution to the default value set for Adaptive Resolution in the Options dialog box.

If Adaptive Resolution is set to Program Controlled, the default value is 4 when the Physics Preference is Electromagnetics or Explicit. For all other Physics Preference, the default value is 2.

If Adaptive Resolution is explicitly set in the Options dialog box (0-7), the value set will be used as default.

If you set the Resolution explicitly, the set value will be retained.

For databases from previous releases (prior to Release 2020 R1), the Resolution will be explicitly set to a value which is not the default.

For new databases, if Resolution is set to Default and the Adaptive Resolution in the Options dialog box is different than it was when the database was saved, the new value will be used instead.

In this first tutorial, you will learn to generate a fine mesh of a geometry using Ansys Meshing.


Do you want to learn Ansys ICEM CFD?

Related Articles

Ansys Meshing – Mesh Types (Hexa, Prism, Polyhedral)

Ansys Meshing – Mesh Types (Hexa, Prism, Polyhedral)

When geometries are complex or the range of length scales of the flow is large, a triangular/tetrahedral mesh can be created with far fewer cells than the equivalent mesh consisting of quadrilateral/hexahedral elements.

Ansys Meshing – Hexahedral Mesh (Pipe)

Ansys Meshing – Hexahedral Mesh (Pipe)

The MultiZone mesh method provides automatic decomposition of geometry into mapped (structured/sweepable) regions and free (unstructured) regions.

Ansys Meshing – CutCell

Ansys Meshing – CutCell

The CutCell meshing process involves the following approach:
Objects, material points (optional), and size functions are defined.
The initial size of the Cartesian grid is computed based on the minimum and maximum size set for the size functions.

Ansys Meshing – Parallel Meshing

Ansys Meshing – Parallel Meshing

You can control three mechanisms in ANSYS Workbench that operate in a parallelized manner:
Remote Solve Manager Design Point updates. Refer to RSM Configuration.

Ansys Meshing – Bias Factor

Ansys Meshing – Bias Factor

Source: Ansys Bias Type and Bias Option For edges only, use Bias Type to adjust the spacing ratio of nodes on an edge. This feature is useful for any engineering problem where nodes need to be clustered on an edge or group of edges, or if there is a need to bias the...

Stay Up to Date With The Latest News & Updates

Help us keep growing

CFD.NINJA is financed with its own resources, if you want to support us we will be grateful.

Join Our Newsletter

Subscribe to receive emails with detailed information related to the CFD.

Follow Us

Subscribe to our social networks to receive notifications about our new tutorials

Pin It on Pinterest


Share This

Share this post with your friends!

Advertisment ad adsense adlogger