Ansys Meshing - How to select internal walls?

Written by cfd.ninja
Internal walls are the surfaces inside the domain that the flow meets on both sides: baffles, splitter plates, the wall of a tube separating two fluids. They are easy to miss because they are not part of the outer boundary of the model.
The mesher treats them differently from an external wall. A surface with fluid on both faces becomes an interior wall with a shadow face, and each side can carry its own boundary condition, which is exactly what conjugate heat transfer needs.
The practical advice is to name them in the geometry stage. A Named Selection created before meshing carries through to the solver as a labelled boundary, and saves you hunting for a hidden internal face inside a finished mesh.

In this tutorial you will learn two different ways to select the internal faces of a geometry. In this case we have a pipe with several elbows.

Ansys Meshing – Multizone + Inflation + Face Meshing
In this tutorial you will learn how to generate a structured mesh using Ansys Meshing.

Ansys Meshing | Inflation
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.
Related Articles
Ansys Meshing – Match Control
In this tutorial, you will learn how to use the Match Control tool in Ansys Meshing. Match Control allows duplicating the mesh in a body. We have two option Match Control Cyclic and Arbitrary.
Ansys Meshing – Body of Influence
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.
Ansys Meshing – Sphere of Influence
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.
Ansys Meshing – Sizing
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.
Ansys Meshing – Refinement
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.
Ansys Meshing – Method
In this tutorial, you will learn to use the Inflation tool in Ansys Meshing to control the boundary layer mesh near walls for more accurate CFD simulations.





