Select Page
Ansys Meshing – Multizone + Inflation

#### Bookstore

Source: Ansys

The MultiZone mesh method provides automatic decomposition of geometry into mapped (structured/sweepable) regions and free (unstructured) regions. It automatically generates a pure hexahedral mesh where possible and then fills the more difficult to capture regions with unstructured mesh. The MultiZone mesh method and the Sweep mesh method operate similarly; however, MultiZone has capabilities that make it more suitable for a class of problems for which the Sweep method would not work without extensive geometry decomposition.

The MultiZone mesh method provides automatic decomposition of geometry into mapped (sweepable) regions and free regions. When the MultiZone mesh method is selected, all regions are meshed with a pure hexahedral mesh if possible. To handle cases in which a pure hex mesh will not be possible, you can adjust your settings so that a swept mesh will be generated in structured regions and a free mesh will be generated in unstructured regions.

In this tutorial, you will learn to use the Multizone and Inflation tool using Ansys Meshing. With this tool, you can improve the mesh.

## Ansys Fluent Tutorial | Heatsink

In this tutorial, you will learn how to simulate a Heatsink using Ansys Fluent. In this first video, you will see how to create the geometry and the mesh using DesignModeler, Ansys Meshing and Ansys Fluent.

## Ansys Meshing | Inflation

You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.

## Ansys Fluent Tutorial | Heatsink

In this tutorial, you will learn how to simulate a Heatsink using Ansys Fluent. In this first video, you will see how to create the geometry and the mesh using DesignModeler, Ansys Meshing and Ansys Fluent.

## Ansys Meshing | Inflation

You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.

## Ansys Meshing – Keyframe Animation

You can make animations based on keyframes. Keyframes define the start and endpoints of each section of animation.

## Ansys Meshing – Match Control

In this tutorial, you will learn how to use the Match Control tool in Ansys Meshing. Match Control allows duplicating the mesh in a body. We have two option Match Control Cyclic and Arbitrary.

## Ansys Meshing – Body of Influence

The Body of Influence option is available in the Type field if you selected a body and Use Adaptive Sizing is set to No. Using this option, you can set one body as a source of another body

## Ansys Meshing – Sphere of Influence

The Sphere of Influence option is available in the Type field after you select an entity such as a body, face, edge, or vertex.

## Stay Up to Date With The Latest News & Updates

### Help us keep growing

CFD.NINJA is financed with its own resources, if you want to support us we will be grateful.

### Join Our Newsletter

Subscribe to receive emails with detailed information related to the CFD.

### Follow Us

Subscribe to our social networks to receive notifications about our new tutorials

Shares

### Share This

Share this post with your friends!

Advertisment ad adsense adlogger