Ansys Fluent – Airfoil 3D (NACA 4412)
Written by cfd.ninja
Source: NASA
The NACA four-digit wing sections define the profile by:[1]
For example, the NACA 2412 airfoil has a maximum camber of 2% located 40% (0.4 chords) from the leading edge with a maximum thickness of 12% of the chord. Four-digit series airfoils by default have maximum thickness at 30% of the chord (0.3 chords) from the leading edge.
The NACA 0015 airfoil is symmetrical, the 00 indicating that it has no camber. The 15 indicates that the airfoil has a 15% thickness to chord length ratio: it is 15% as thick as it is long.
In this tutorial you will learn to simulate an Airfoil 3D (NACA 4412) using Ansys Fluent. In this tutorial we will use a polyhedral mesh which adapts better to the geometry and allows to obtain convergence in less time compared to the tetrahedral mesh.
Convert Photography to Mesh using Gmsh
Learn how to generate a CFD mesh from any photograph using the Gmsh mesher.
Ansys Fluent Tutorial | Heatsink
In this tutorial, you will learn how to simulate a Heatsink using Ansys Fluent. In this first video, you will see how to create the geometry and the mesh using DesignModeler, Ansys Meshing and Ansys Fluent.
Related Articles
Ansys Meshing – Multizone + Inflation
The MultiZone mesh method provides automatic decomposition of geometry into mapped (sweepable) regions and free regions. When the MultiZone mesh method is selected, all regions are meshed with a pure hexahedral mesh if possible.
Ansys Meshing – Multizone + Inflation + Face Meshing
You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.
Ansys Meshing | Inflation
You can set the Use Automatic Inflation control so that inflation boundaries are selected automatically depending on whether or not they are members of Named Selections groups.
Convert Photography to Mesh using Gmsh
Learn how to generate a CFD mesh from any photograph using the Gmsh mesher.
Ansys Fluent Tutorial | Heatsink
In this tutorial, you will learn how to simulate a Heatsink using Ansys Fluent. In this first video, you will see how to create the geometry and the mesh using DesignModeler, Ansys Meshing and Ansys Fluent.
Ansys Fluent | Hydraulic Jump
$variable({"type":"content","value":{"name":"post_title","settings":{"before":"","after":""}}})$ $variable({"type":"content","value":{"name":"post_author","settings":{"before":"Written by...