In this tutorial, you will learn how to use the Reference Values window for a 3D simulation. With Reference Values (Lenght, Area, etc.), you can find the Drag Coefficient. In this case, the experimental Drag coefficient (Cd) is 1.05.
In this tutorial, you will learn how to use the Reference Values window for a 2D simulation- With Reference Values (Lenght, Depth, Area, etc.), you can find the Drag Coefficient. In this case, the experimental Drag coefficient (Cd) is 1.55.
In this tutorial, you will learn how to use a basic UDF file, compile, and modify it.If you have problems for Open Ansys Fluent and choose the Working Directory, you can open it from Windows Prompt, please see this video: https://www.youtube.com/watch?v=xt2hnE9_LdM
Download Mesh: AxialFan Source: DesignSpark Fan Types – Why choose an Axial fan When we have defined the volume flow rate that we require, whether this is to provide fresh air…
This is a basic tutorial about static mixer using ANSYS FLUENT. In this tutorial, you will learn how to create the geometry and the mesh, you will learn how to modify the setup too and visualize the results (internal planes and streamlines).
The VOF formulation in ANSYS FLUENT is generally used to compute a time-dependent solution, but for problems in which you are concerned only with a steady-state solution, it is possible to perform a steady-state calculation.
The amount of lift generated by an object depends on how much the flow is turned, which depends on the shape of the object. In general, the lift is a very complex function of the shape. Aerodynamicists model the shape effect by a lift coefficient which is normally determined through wind tunnel testing. For some simple shapes, we can develop mathematical equations to determine the lift coefficient.
In this tutorial of a centrifugal pump you will find the basic setup using Ansys Fluent, we will use the pseudo timestep to accelerate the convergence
Source:physics.info When the speed of a source equals the speed of sound (v = c) the wave fronts cannot escape the source. The resulting pile of waves forms a large amplitude “sound barrier”…
Instructions for specifying the necessary information for the primary and secondary phases and their interaction in a VOF calculation …